UR - Corporate Engineering - Controls Systems Engineer (Maplewood, MN)-1309637
Organization: Corporate Staff Groups
Primary Location: USA Region-United States-Minnesota
Job Type: Entry Level
Description
3M is seeking an entry level Control Systems Engineer for Engineering’s Process Information and Control Solutions (PI&CS) organization at it’s Maplewood, Minnesota headquarters.
Job Summary:
In this position you will be responsible for the specification, design, and integration of process equipment control systems used to manufacture 3M products.
We are proud to offer a culture with high levels of team work, collaboration, and cooperation. The successful candidate will have the opportunity to become exposed not only to controls systems, but numerous 3M manufacturing processes, equipment and techniques, in numerous locations throughout the United States and the world.
Roles and Responsibilities:
- In this position you will be responsible for the specification, design, and integration of control systems used to manufacture 3M products. Specific responsibilities include, but are not limited to the following;
- Control systems architecture scope development and design
- Control systems cost estimating and schedule development
- Hardware purchasing
- Engineering drawing development, including P&ID’s,
- PLC/HMI programming
- Systems integration
- Machine commissioning, start up, and check-out
Within this role you will develop an expertise in one or more of the following technologies;
- PLC/HMI programming in a variety of formats and platforms.
- Motor drive systems
- Motion control
- Digital and analog systems
- Control system networking
- Sensing & measurement devices
Location:
The person hired for the position of Control Systems Engineer will be located in Maplewood, Minnesota and relocation authorized within Country per 3M relocation policy. The successful candidate should anticipate an average of 30% travel to numerous 3M manufacturing locations located throughout the US.
Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws
Qualifications
Basic/Minimum Qualifications:
- Currently possess or are in the last year of pursuing a Bachelor's degree in Electrical Engineering from an accredited program.
Preferred Qualifications:
- Current cumulative GPA of 3.0 or higher on a 4.0 Scale.
- Prior internship / co-op experience involving a control systems engineering process or technology
- Prior internship / co-op with 3M or another manufacturing company
- Strong oral and written communications skills
- Team player with the ability to contribute in a matrix environment
- Project management experience
Location: Maplewood, MN
Travel: May include up to 30%
Relocation: Is authorized
About 3M
3M captures the spark of new ideas and transforms them into thousands of ingenious products. Our culture of creative collaboration inspires a never-ending stream of powerful technologies that make life better. 3M is the innovation company that never stops inventing. With $30 billion in sales, 3M employs about 88,000 people worldwide and has operations in more than 70 countries. Be part of what’s next! Join 3M – follow us @3MCareers and learn more at YouTube.com/3MCareers.
Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws.
U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens.
To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s).
The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election.
Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).
Employment Statement
Apply now for this exciting opportunity with 3M.
3M is an EEO/AA employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply.
J2W:EVENT
Organization: Corporate Staff Groups
Primary Location: USA Region-United States-Minnesota
Job Type: Entry Level
Description
3M is seeking an entry level Control Systems Engineer for Engineering’s Process Information and Control Solutions (PI&CS) organization at it’s Maplewood, Minnesota headquarters.
Job Summary:
In this position you will be responsible for the specification, design, and integration of process equipment control systems used to manufacture 3M products.
We are proud to offer a culture with high levels of team work, collaboration, and cooperation. The successful candidate will have the opportunity to become exposed not only to controls systems, but numerous 3M manufacturing processes, equipment and techniques, in numerous locations throughout the United States and the world.
Roles and Responsibilities:
- In this position you will be responsible for the specification, design, and integration of control systems used to manufacture 3M products. Specific responsibilities include, but are not limited to the following;
- Control systems architecture scope development and design
- Control systems cost estimating and schedule development
- Hardware purchasing
- Engineering drawing development, including P&ID’s,
- PLC/HMI programming
- Systems integration
- Machine commissioning, start up, and check-out
Within this role you will develop an expertise in one or more of the following technologies;
- PLC/HMI programming in a variety of formats and platforms.
- Motor drive systems
- Motion control
- Digital and analog systems
- Control system networking
- Sensing & measurement devices
Location:
The person hired for the position of Control Systems Engineer will be located in Maplewood, Minnesota and relocation authorized within Country per 3M relocation policy. The successful candidate should anticipate an average of 30% travel to numerous 3M manufacturing locations located throughout the US.
Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws
Qualifications
Basic/Minimum Qualifications:
- Currently possess or are in the last year of pursuing a Bachelor's degree in Electrical Engineering from an accredited program.
Preferred Qualifications:
- Current cumulative GPA of 3.0 or higher on a 4.0 Scale.
- Prior internship / co-op experience involving a control systems engineering process or technology
- Prior internship / co-op with 3M or another manufacturing company
- Strong oral and written communications skills
- Team player with the ability to contribute in a matrix environment
- Project management experience
Location: Maplewood, MN
Travel: May include up to 30%
Relocation: Is authorized
About 3M
3M captures the spark of new ideas and transforms them into thousands of ingenious products. Our culture of creative collaboration inspires a never-ending stream of powerful technologies that make life better. 3M is the innovation company that never stops inventing. With $30 billion in sales, 3M employs about 88,000 people worldwide and has operations in more than 70 countries. Be part of what’s next! Join 3M – follow us @3MCareers and learn more at YouTube.com/3MCareers.
Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws.
U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens.
To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s).
The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election.
Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).
Employment Statement
Apply now for this exciting opportunity with 3M.
3M is an EEO/AA employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply.
J2W:EVENT